Видео

Take the door down, then remove the screws from both sides, then use a 2x4 as a wedge to knock the lower frame off, replace both wheel assembly at one time, replace the lower frame, replace screws, put door back in adjust hight. Replace track if necessary.

I just installed one of these doors after trying one at a friends house ( a different brand ) The Anderson does not fit or work as well as the other brand. The screen seems loose when closed and doesn't retract completely without help. I bought the Anderson because I have always used their windows. Unfortunatly I don't know what brand the one I liked was. Not impressed...

Toyota once uou buy 1 you dont buy anything else

You didn't happen to buy that FJ Ohio

I had a 07 FJ was horribly rusted underneath worse then this by a lot then I traded in for the same year with no rust underneath. Pennsylvania rust is horrible the new fj from Wisconsin was rustless underneath

Do you know the torque spec for the upper oil pan?

Can we use this address for 1) IRS 2) address to Employer 3) Driving license ?

Finally a great video

Very simple video.

Way easier to just the door out and lay it down

You didn’t remove the screen?

Is this the same part and process for the 2011 Toyota 4Runner? I’m having a difficult time finding instructions for this particular body style. The assembly is difficult to find outside of Toyota factory. I am considering replacing just the electric motor part to avoid drain/refill on the brakes, but i cant find any information specific to the part used on the 2011 4Runner. Any links or help or guidance are appreciated.

Yeah what was the problem?

Only showed where it's at. Great title loser

Horrible video! Useless

I've read that having the exhaust system on top of the screen can damage or deteriorate the screen, due to the hot air blowing out. I see that your video is 10 years old, so I'm wondering if you've had screen damage since then. My screens are next to impossible to remove. Thank you.

Awesome build!!

Can you explain how to fix 2014 Toyota FJ Cruiser . Only two error codes were stored: C1241 and C1452. No ABS light stays on the dashboard when drive. Accumulator sensor voltage in range between 3.4 to 4.7 and change when pump operated

This is the best way!

Duvvvalllll

Why don’t you buy a cheap tripod , I see so many utuber’s fumbling with only 1 hand.

I know this is an old post, but what type of grease did you use? I have the same problem in my Chevy. The original switch/hoses and the replacement ones I got at the junkyard all leak. I've read not to use dielectric grease, petroleum jelly or super glue. In the Chevy trucks it defaults to vents. If you need your defrost, you're screwed.

Just the video I was looking for. It seems that you get better components for the money, with the current hard tail mountain bikes. As an older rider, I'm not sure how long I'm going to be able to handle the more aggressive position. The option to convert gives me the long-term ownership prospects i'm looking for.

Thanks for this! Mine just got WALLOPED--in the SUPER STRONG dryer at a carwash 😢

This happened to me with in 2 days of using this thing.. I was very annoyed!

Mine don't have a spanner nut its has 4-5 bolts which yeah are rusted to death. The problem i have is when i try to unscrew them the whole tub rotates.

Do you have video of the install of the flares

I bought a new mountain bike a couple years ago, but like your wife, it makes my wrists and shoulders hurt and no amount of adjusting helps, which is weird because I've been riding those types of bikes for 45 years. I was wondering if I could convert it, and now I know I can. Thank you!

Where did you check it with your fuel pressure gauge? I can't seem to find it on mine. What all did you remove to get to it?

U have to cover the entire window or your letting the outdoor heat in.

you confused the heck out of me with all the extra stuff about relays and stuff so do i have to get 2 different parts to make it work or do i just get the 1 part from Amazon that you plugged in

Does the other fuel rail have a dampener?

May 2024. Used 2015 Sienna. Love the vehicle. This light caused a disturbance in our household. But this video alleviated that. Thanks.

Same thing for Sequoia?

I wish more "repair videos" were this succinct and direct-to-the point. Running through the full diagnostic process in 23 seconds has to be a record ;-)

How much do you think you would sell it for ?

What an awesome project

Wasn’t easy but thanks to you we have a working door! 🎉

stopping at 1:09, you literally need to hold the steam on the spot for more than 0.0004 seconds. The way you're demonstrating it, all you're accomplishing is making the area slightly warm and wet. I'm not suggesting the results will get significantly better, but you're using it like a scouring pad, which it's not. Concentrate the steam for a few seconds(like 5) on one spot before you move the head unit.

i need 1 for 2013 lexus ct200h

Let me join the fan club. Because of this video, I looked for any dirty of frayed connections. I found some dirt in the connector from the interface into the main circuit board. After cleaning it, it worked great. Thank you for this video.

she be all rusty crusty!

You need to mix it with a chemical. This is common knowledge. Noone is just steaming it they spray it with an all purpose cleaner or degreaser let sit then steam. The idea is that you let the chemical do the work then steam so that you don't have to scrub. And also you are cleaning, it's disinfecting.

I am doing KBB evaluations at a dealer. Customers are always lying about the condition of their cars. Also, they try to hide previous accidents. Honestly could not see your truck at all from your video. Some dealers will offer lower offers just because that truck is not good for their market but most of the time the dealers are following up the KBB process. People tend to lie in their condition description and then somehow is the dealer's fault for calling out their lies.

This was perfect. Thank you. I had a small rock embedded in my track at the bottom. Maybe could have fixed it with our removing the door but I couldn't see it Ana I didn't know what was wrong until I had the door off. Easy easy thanks to your tips. Thanks again

Does the 4.7 motor bolt up directly to the fj cruiser transmission? Or was an adapter used or you also swapped the transmission?

Why do people put the Lexus steering wheel in the Fj?

good video , do you think putting some insulation styro foam between the wheel wells and camper would also help keep the camper tight ? from rocking ? thanks

Is there a part number out there for an 01-02 4runner for the abs pump motor only?

WD40 before trying to remove wheels